A new chainsaw

[Boston_Joe]

We have more and more stations offering it. I run it in all of my small engines.

Some premium gasoline may also be ethanol free.

[redman2006]

Semi related, there are sites on line that list local none ethanol gas stations. Murphy, which is associated with Wal-Mart, always has it around here and back home. I do not know if that is regional. I always watched for it for my bike. Most of our Citgo stations have it as well.

https://www.pure-gas.org/extensions/map.html

This is one of many sites

[redman2006]

four brands to consider: Stihl, Husqvarna, Echo, and Johnsared.

Of those, I own 2. A large stihl that is way beyond your needs, and a Husqvarna 51. that little 51 has been fabulous since 1997. It has cut many cords of wood and rescued me many times with storms and the like. It is about worn out and has been reduced to limbing duties. I do not suggest electric. Not fun to drag a cord through limbs and downed trees after a storm even if you still have power.

A buddy sells Echo, and swears that they are wonderful machines for homeowner use. I know my weed trimmer by that company has been very reliable. The newer Johnsared are not the Johnsared of old, but are still awfully good machines.

For me, one of the above brands in a 45 to 60 cc motor with a 14 to 18 inch bar is a perfect saw for what you describe.

I would suggest buying from whomever has the best local service and parts availability locally. for me, my new saw was a stihl instead of a husky for that reason.

[Boston_Joe]

I have the same saw as olfart and have had a very good run with it. My only complaint would be all of the places under the cover where oil soaked wood chips build up.

As Outlaw stated the ethanol/gas is a destroyer of all things with a small engine on them. I've had no problems running it with the premixed fuels.

[0utlaw]

Our department ran about a dozen saws, a mix of Stihl and Echo. The Stihl saws are by far the more reliable of the two. Husqvarna makes a good saw too but parts are harder to get around here for them. With whatever you choose make sure you have parts source available, a chainsaw (any of them) can be finicky. Premix is great if you aren't able to get non E gas. Almost all running failures these days go back to E10 gas.

[Celt]

Growing up we would cut about 4-6 cords of live oak and maybe 1-2 of pine each winter. We used Homelite saws that functioned flawlessly but they aren't out there any longer. Husquvarna has taken their place with what we use to keep the older folks warm avoiding the high cost of purchasing wood. We cut much larger diameter wood than you have described as needing a saw for. The oak cuts very easy when alive and is actually fairly soft. After it's cured is when you run into lots of trouble as it gets extremely dense. Pine in my opinion will do more to foul your saw than oak due to the high concentration of sap (Turpentine which eats petroleum based lubricants) than oak requiring more maintenance and oiling. In my opinion a stretching chain can be alleviated by proper bar adjustment which is pretty simple ensuring it's set but needs to be done throughout your workday. On lunch breaks is when we would sharpen our saws with a rattail file doing any necessary maintenance while eating. It's really not too difficult. You don't need a very large bar for what you are describing 24" or so should easily suffice. A larger bar only makes things more difficult for the limbing from the trunk and maintain the saw. It also wears you out having to hold that saw out in front of you or up over your head. When the saws are not in use treating them something like a generator with fuels and oils is effective i.e. keeping them drained of fuel unless you use Stabil or Pri-G/similar type to prevent your saw from internally gumming up.

[olfart]

Husqvarna makes good saws. I have a 455 Rancher that has served me well for 5 - 6 years and still going strong. I cut at least a cord of oak per year plus whatever falls across the driveway or in the yard. Heck, I even took down a 70' pine that the Dish Network tech said was interfering with my satellite reception... while he was working on the dish. That cleared up the problem.

[kickstand]

I'm looking for some help figuring out what chainsaw to get. By no means am I a saw expert...in reality, I basically know nothing about them other than I need one to drop the occasional tree and to cut up said tree into firewood. I also use it to cut purchased pecan firewood into smaller pieces, as I have a pretty small fireplace. I go through about half a cord a year, as I live in southern New Mexico, and the weather is pretty nice most of the time. As of this time, the largest tree that I've had to fell is about 14 inches in diameter, and that was years ago. Most of what I need to work on is 12" diameter or less. I like a 14" or 16" bar and chain. I don't see much need for anything larger. I cut a combination of pine, pecan and scrub oak woods.

For the last 10 years, I've been getting Craftsman saws from Sears. Almost without exception, the chain oil pump has quit oiling the bar and chain. My first gas saw lasted a year and a half. When it quit oiling, it was also getting difficult to start. For a replacement, I opted for a 110v electric 14" with a manual oiler (you had to push on the lid of the oil tank to push oil to the screen. This worked fairly well for me, but after 1.5 to 2 years, the electric motor failed. I replaced that one with another 110v electric, this time opting to try out the automatic oiler. Well, that oiler quit within a year. I took it back to Sears and they gave me another new one to replace it. A year and a half years later, the oiler/oil pump on this one has failed. To make it work and cut my firewood, I've been dipping the end of the bar & chain into a small container of chain oil, but that gets rather messy.

I only use 30 weight Bar & Chain oil. Years ago, I tried experimenting with regular 30 weight automoive engine oil as Bar & chain oil, and my chain kept stretching, and stretching, so I went back to the correct chain oil. When I had a gas saw, I always mixed my own fuel/oil mix, but I will likely use premixed in the future for convienence and not having to to mess with mixing. To my knowledge, there are no fuel stations that sell any fuel without 10% ethanol.

I'm looking into the Stihl Wood Boss, the Stihl Farm Boss, and the Echo CS490. A small part of me is tempted to try one of the Stihl battery operated units, but doubt that they will last long enough to do what I need/want it to do.

Do any of our wood cutting members have any good advice or suggestions for me? Like most, I'd rather not throw any more money than I need to at this, but I'm tired of buying crappy saws that only last a couple of years. If I get another gasoline engine based saw, I wouldn't mind if it had the ability to use some sort of external starter on it. Personally, I think that any and every pull start engine should have that ability. Yes, I'm aware that this feature is most likely only going to be found on professional, $1000 plus saws, but it sure would be nice.