Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: drill . cordless

  1. #1
    Join Date
    Jun 2014
    Posts
    3,270
    Thanks
    1,765
    Thanked 4,394 Times in 1,759 Posts

    drill . cordless

    I have several big projects I need to work on, and my dewalt died. Long story short, I picked up a new 18 volt drill/driver kit with an impact driver jncluded in the kit.

    OK, maybe I am the only one living under a rock, but the impact driver, not impact wrench, is awesome! No more twister off heads or stripped heads. No more twisted wrists.

    If anyone is considering a new drill and does a lot of driving with it, it is very worth while to get the impact driver.

    As a side note, the well is fixed, the raised bed boxes are coming along, the broiler coop will be next.

  2. The Following 4 Users Say Thank You to redman2006 For This Useful Post:


  3. #2
    Join Date
    Mar 2013
    Location
    Vado, NM
    Posts
    6,071
    Thanks
    13,208
    Thanked 14,504 Times in 4,266 Posts
    A link or picture of what you got would be helpful.
    When oppression becomes law, resistance become duty.

  4. #3
    Join Date
    Mar 2013
    Posts
    3,976
    Thanks
    3,133
    Thanked 7,538 Times in 2,662 Posts
    Did the drill die or did the batteries go Tango Uniform?

  5. #4
    Join Date
    Jun 2014
    Posts
    3,270
    Thanks
    1,765
    Thanked 4,394 Times in 1,759 Posts
    I picked up a rigid. The free batteries for life sealed the deal.

    The batteries went and I replaced one. The the motor smoked. I asked more than I should of it probably. I can't get electricity to the fence posts where I needed to hang a gate and I did not gave the right bit for the brace, so I ran an auger but in the cordless. End of drill.


    Tex, running those bits and big assed lags (I know use a ratchet) are what I mean about the wrist. Those things bite and hang without a t handle and it is tough on an old break.

  6. The Following User Says Thank You to redman2006 For This Useful Post:

    AD

  7. #5
    Join Date
    Oct 2013
    Posts
    1,493
    Thanks
    2,605
    Thanked 5,385 Times in 1,271 Posts
    How funny...I am shopping for a drill and have this one in mind:

    http://www.amazon.com/gp/product/B00...=ATVPDKIKX0DER

    Is that the one you got, redman?

    I have an old drill but it does not have reverse feature, which I really need.

    Kelly

  8. #6
    Join Date
    Jun 2014
    Posts
    3,270
    Thanks
    1,765
    Thanked 4,394 Times in 1,759 Posts
    That is my old one I think. I would stay away from the nicad batterie . They have a memory and if you leave them plugged to the charger, they will go bad. They also discharge a good bit just sitting there. The lithium batteries are much nicer. I got the rigid brand 18 volt with lithium batteries 2 amp hour and am very pleased. On sale for less than $150. Now that included the impact driver. If I decide later, I will grab some of the 4 amp hour batteries. Around Christmas, home depot runs a two for one on all batteries every year.

    This 2 amp hour has lasted a lot longer than the old nicad did.

    A lit will depend on what you like to use it for. Light drilling and dry wall screws, the 12 volts are nice. Heavier stuff requiring extended runs and lots of torque the 18 volt. If money were no object and you were a pro, the Milwaukee or makita brushless are what I would buy.

    For me, the rigid was the best balance. They also have a free batteries for life deal. Considering they re $100 a pop, that sold me. They also have a lifetime service guarantee. It is a pain to use, but they will honor it.

  9. The Following User Says Thank You to redman2006 For This Useful Post:


  10. #7
    Join Date
    Mar 2013
    Location
    Vado, NM
    Posts
    6,071
    Thanks
    13,208
    Thanked 14,504 Times in 4,266 Posts
    Is this what you got? Is it 2 separate tools?

    http://www.homedepot.com/p/RIDGID-18...B&gclsrc=aw.ds
    When oppression becomes law, resistance become duty.

  11. #8
    Join Date
    Jun 2014
    Posts
    3,270
    Thanks
    1,765
    Thanked 4,394 Times in 1,759 Posts
    That looks like it . Rated at 650 inch lbs for the drill and 1700 for the impact driver.

    The impact driver is a separate tool.

  12. The Following User Says Thank You to redman2006 For This Useful Post:


  13. #9
    Join Date
    Jan 2015
    Posts
    28
    Thanks
    0
    Thanked 61 Times in 23 Posts
    I bought the rigid tool set over 6 years ago(been through one set of batteries-they replaced), I would buy them again. My drill is also the hammer drill and the set has worked great.

  14. The Following User Says Thank You to kscmac For This Useful Post:


  15. #10
    Join Date
    Dec 2015
    Location
    Oklahoma
    Posts
    17
    Thanks
    0
    Thanked 45 Times in 12 Posts
    I picked up the Dewalt impact driver and hammer drill combo complete with 2 4ah batteries. I'm putting up a telephone pole shed and tried using my 7yo craftsman 20v drill. With the battery fully charged it straight up quit about midway on the first 4" lag bolt. I'm not sure if it overheated or if it was draining the battery to fast. Paid for the dewalt name but every dewalt any of my family members have bought has returned its value and then some.

    FYI - I've been using black and decker $5 nut driver bits and have had no issues. I'm still shocked that the one i'm using to drive 4" lags hasnt snapped yet.

  16. The Following User Says Thank You to knotReally For This Useful Post:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •